Altair One

Double wall design
Weighing just 0.9 kg
Full-coverage removable fly
Easy T door entry
Large adjustable vent
Fully factory taped seams
Big protective vestibules
Durable 20D Silicone Coated Nylon
3000mm waterproof rate for fly and 4000mm for bathtub floor
A peak height of 120cm gives you plenty of headroom
Tent floor 220 by 80 cm to comfortably sleep 1 person
Inner mesh tent brings in maximum air flow and prevent elements
Waterproof snag free SAB zippers
A pocket to keep your stuff within reach
Camping lantern attach point underneath the roof
Reinforced stitches, tie-out points for better stability
Reflective guy lines
Ultra-light 7000 series aluminum stakes

Dimensions
Floor Length: 86.6"/220cm
Floor Width: 31.5"/80cm (Head and Foot End) 43.3"/110cm (Middle)
Peak Height: 47.2"/120cm
Packed Size: 10.2"*7.5"*5.1"/26*19*13cm

Weight
Weight: 2lbs/0.9kg (Fly and Inner Tent Only)
Total Weight: 2.27lbs/1.03kg (With Accessories)

Material
Canopy: 20D Ripstop Sil Nylon 3000mm
Floor: 20D Ripstop Sil Nylon 4000mm
Netting: 20D No-See-Um Nylon Mesh

Set Up Fly:
Lay out the fly with the head pointing into the wind on a clear ground
Stretch corners with pegs in the shape of a hexagonal.
Put the trekking pole from the inside to the top of the tent, with the tip at the peak and handle on the ground vertically about 47 inches.
Adjust the corners and tightening guy lines for good stretch of shelter.

Attach Inner Tent to Fly:
Attach mesh to fly: connect the mesh top with a hook to the o-ring on fly roof.
Peg out inner floor: stretch the 5 bungee cords of inner tent out over the stakes that already there while setting up fly.

1 x Tarp
1 x Inner Tent
8 x Stakes
4 x Guyline
1 x Tent Sack
1 x Stake Sack